|
Tankless
Water Heaters
Enjoy
an Unlimited Supply of Hot Water!
Save Money and Save Water!
We no
longer offer this Elite gas tankless
water heater.
We recommend the Steibel Eltron line of Electric
Tankless water heaters or the Paloma
line of Gas Tankless water heaters.
ThermElite-Workman
with Battery Spark Ignition
Natural Gas or Liquid Propane
Produces 3.2 gallons per minute with 60º F
temperature
rise.
Nearly 200 gallons per hour.
|
Product ID: ELT-TE125X
|
Save the
consumer money by lowering the gas necessary to heat water by as
much as fifty percent (50%) for tank-type water heaters that
constantly heat "stand-by" water.
Requires no
Electricity!
|
Compares favorably with
tank-type 75-gallon heaters which need 20 to 25 minutes for
"recovery" time to reheat the standing water.
Simply open any hot water tap and the water flow is
detected. In turn, the electronic sparker; powered by the two D-Cell
batteries, fires the stainless steel burner of the unit, thereby heating
the water to a maximum of 90º F.
An LED "Low Battery
Indicator" advises the homeowner when to change batteries.
Plumbing
-
Up to 3 units may
be plumbed in parallel for greater hot water demand.
-
Can be plumbed up to 3 parallel units for commercial
applications such as restaurants and car washes.
-
Never stores hot water, a cause for leaks and rust build-up.
No electrified
power vent assist necessary.
Save Money!
These units typically last 25 to 30 years so savings extend to
the cost and installation of 2 or 3 tank-type heaters over that
period of time.
The savings on gas bills alone can repay the
purchase cost of the ThermElite Tankless Gas Water Heater in 3 -
4 years.
Efficiency
rating of 82%.
Saves Energy
Saves Space
Click here for Warranty
and Specifications Click here for Exhaust
Venting Information
|
Parts
For Easier Installation
Saving time during installation is a
large factor. No one likes making all those trips to the hardware
store. Make sure to check out these pages before completing your
order.
Click here for Flex
Connectors
|
ATTENTION:
The voltage, amperage, and circuit breaker specifications must be met
for this heater to function. Please make sure all requirements are met
before purchasing this heater.
If you have any questions about these requirements,
please call 406-889-5288.
|
|
